Elevation 1+ Fast Menu Item
Navigating the Setup menu on the Elevation 1+ unit shows a Fast option and a value in mm/second/second. This option is the rate at which the unit will decererate if it detects an internal fault such as "Overspeed" or "ENC1".
When using Vector to programme Elevation 1+ units this value is automatically set to the maximum deceleration rate, specified in the motor profile.
- Chain Hoist Controllers
- System Diagrams
- Various documents
If you require further support call us now on:
+44 (0)20 8481 9850
or email us at: